Zytel Nylon 6--12
| Effective Date | September 1, 1985 |
| Revised Date | September 19, 2011 |
| Trade Name | Zytel Nylon 6 / 12 |
| Chemical Family | |
| Chemical Formula | Polyhexamethylene dodecandiamide |
| Section II - Hazardous Ingredients | |
| Hazardous Components | |
| Section III - Physical Data | |
| Boiling Point (°F) | |
| Freezing Point (°F) | |
| Volatility / Volume (%) | Approx. 1 |
| Melting Point | 208–215°C |
| Vapor Pressure (mmHg) | |
| Vapor Density (Air=1) | |
| Solubility in H₂O | Insoluble |
| Appearance / Odor | White or black and odorless |
| Specific Gravity (H₂O=1) | |
| Acidity | |
| Section IV - Fire and Explosion Hazard Data | |
| Flash Point | N/A |
| Lower Flame Point | |
| Higher Flame Point | |
| Extinguishing Media | Water, carbon dioxide, foam, dry chemicals |
| For Fire | None |
| Unusual Fire Hazard | |
| Section V - Health Hazard Data | |
| Health Hazard | |
| Threshold Limit Value | |
| Overexposure Effects | |
| Section VI - Reactivity Data | |
| Chemical Stability | |
| Conditions to Avoid | Heating above 340°C |
| Section VI - Reactivity Data - Continued | |
| Incompatible Materials | Strong acids and oxidizing agents |
| Decomposition Products | Ammonia, carbon monoxide, hydrogen cyanide, aldehydes |
| Hazardous Polymerizations | |
| Polymerization to Avoid | |
| Section VII - Spill or Leak Procedure | |
| For Spill | Sweep up |
| Waste Disposal Method | Incineration or landfill in compliance with federal, state and local regulations |
| Section VIII - Special Protection | |
| Respiratory Protection | |
| Ventilation | Local exhaust at processing equipment |
| Protective Gloves | |
| Eye Protection | Safety glasses |
| Other Protective Equipment | |
| Handling and Storage | Cool, dry place |
| Section IX - Special Precautions | |
| Hazard Class | |
| DOT Shipping Name | |
| Reportable Quantity (RQ) | |
| UN Number / NA# | |
| Packaging Size | |
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained, or the safety and toxicity of the product. Polymer Plastics Company L.C. assumes no liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained, or the safety and toxicity of the product. Polymer Plastics Company L.C. assumes no liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Date Available
