Vulcanex
| Effective Date | February 8, 1993 |
| Revised Date | |
| Trade Name | Vulcanex Vulcanized Fibre |
| Chemical Family | |
| Chemical Formula | |
| Section II - Hazardous Ingredients | |
| Hazardous Components | This product consists of partially regenerated cellulose (C₆H₁₀O₅). TLV has not been established by the ACGIH. This material is not classified hazardous. |
| Section III - Physical Data | |
| Boiling Point (°F) | N/A |
| Freezing Point (°F) | |
| Volatility / Volume (%) | |
| Melting Point | N/A |
| Vapor Pressure (mmHg) | N/A |
| Vapor Density (Air=1) | N/A |
| Solubility in H₂O | |
| Appearance / Odor | Color as ordered, no odor |
| Specific Gravity (H₂O=1) | 1.05–1.55 |
| Acidity | |
| Section IV - Fire and Explosion Hazard Data | |
| Flash Point | N/A |
| Lower Flame Point | |
| Higher Flame Point | |
| Extinguishing Media | Water, carbon dioxide (CO₂), or foam |
| For Fire | Use conventional firefighting procedures for wood. Self-contained NIOSH/NHSA-approved breathing apparatus should be worn. |
| Unusual Fire Hazard | Smoke and toxic fumes may be released while burning. |
| Section V - Health Hazard Data | |
| Health Hazard | This product may yield irritant dust if machined or sanded. |
| Threshold Limit Value | |
| Overexposure Effects | N/A |
| Section VI - Reactivity Data | |
| Chemical Stability | Stable |
| Conditions to Avoid | N/A |
| Section VI - Reactivity Data - Continued | |
| Incompatible Materials | Strong oxidizing agents |
| Decomposition Products | Carbon dioxide, carbon monoxide |
| Hazardous Polymerizations | Will not occur |
| Polymerization Avoid | |
| Section VII - Spill or Leak Procedure | |
| For Spill | N/A |
| Waste Disposal Method | Landfill or incineration in accordance with applicable federal, state and local laws and regulations. |
| Section VIII - Special Protection | |
| Respiratory Protection | Avoid inhalation of dust. Use an OSHA-approved dust mask if the ventilation system is adequate. |
| Ventilation | Local exhaust preferred; dust mask; ensure adequate ventilation when machining or sanding; air-filtered work booths. |
| Protective Gloves | Desirable to prevent cuts and abrasion |
| Eye Protection | Guard shields and safety glasses when machining |
| Other Protective Equipment | N/A |
| Handling and Storage | Wash hands before handling food |
| Section IX - Special Precautions | |
| Hazard Class | |
| DOT Shipping Name | |
| Reportable Quantity (RQ) | |
| UN Number / NA# | |
| Packaging Size | |
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained, or the safety and toxicity of the product. Polymer Plastics Company L.C. assumes no liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained, or the safety and toxicity of the product. Polymer Plastics Company L.C. assumes no liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Data Available
