The Plastics Today for the Technologies of Tomorrow

Riser Plates Material Safety Data Sheet

Riser Plates

Effective DateJune 1, 1993
Revised DateSeptember 15, 2011
Trade NameRiser Plate
Chemical Family
Chemical Formula
Section II - Hazardous Ingredients
Hazardous ComponentsThermoset laminate consisting of a cured phenolformaldehyde resin on a cellulose substrate
Section III - Physical Data
Boiling Point (°F)N/A
Freezing Point (°F)N/A
Volatility / Volume (%)N/A
Melting PointN/A
Vapor Pressure (mmHg)N/A
Vapor Density (Air=1)N/A
Solubility in H₂ON/A
Appearance / OdorAlmond or tan in color with faint phenolic odor
Specific Gravity (H₂O=1)1.3–1.4
AcidityN/A
Section IV - Fire and Explosion Hazard Data
Flash PointN/A
Lower Flame PointN/A
Higher Flame PointN/A
Extinguishing MediaWater, carbon dioxide or foam
For FireUse conventional firefighting procedures for wood.
Unusual Fire HazardSmoke and toxic fumes may be released while burning.
Section V - Health Hazard Data
Health Hazard
Threshold Limit Value
Overexposure EffectsDust may cause minor irritation to eyes and nasal passages.
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to AvoidN/A
Section VI - Reactivity Data - Continued
Incompatible MaterialsStrong oxidizing agents
Decomposition ProductsCarbon dioxide, carbon monoxide, phenols, methane, aromatic hydrocarbons and formaldehyde
Hazardous PolymerizationsWill not occur
Polymerization to AvoidN/A
Section VII - Spill or Leak Procedure
For SpillN/A
Waste Disposal MethodLandfill or incineration in accordance with applicable federal, state and local laws.
Section VIII - Special Protection
Respiratory ProtectionUse an OSHA-approved dust mask if the ventilation system is inadequate.
VentilationLocal exhaust preferred
Protective GlovesDesirable to prevent cuts and abrasion
Eye ProtectionGuard shields or safety glasses when machining
Other Protective Equipment
Handling and StorageSheets can slide if stacked too high and not restrained.
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained, or the safety and toxicity of the product. Polymer Plastics Company L.C. assumes no liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Data Available