The Plastics Today for the Technologies of Tomorrow

PVDF Material Safety Data Sheet

PVDF

Effective DateJanuary 19, 1993
Revised DateApril 15, 2011
Trade NameKynar
Chemical FamilyFluorinated Polymer
Chemical FormulaPolyvinylidene Fluoride
Section II - Hazardous Ingredients
Hazardous Components
Section III - Physical Data
Boiling Point (°F)N/A
Freezing Point (°F)
Volatility / Volume (%)N/A
Melting Point166–170°C
Vapor Pressure (mmHg)N/A
Vapor Density (Air=1)N/A
Solubility in H₂ONegligible
Appearance / OdorClear and odorless
Specific Gravity (H₂O=1)1.78
Acidity
Section IV - Fire and Explosion Hazard Data
Flash PointNone
Lower Flame Point
Higher Flame Point
Extinguishing MediaDoes not support combustion
For FireWear full protective clothing and NIOSH/MSHA-approved self-contained breathing apparatus with full facepiece, operated in positive-pressure mode.
Unusual Fire HazardThermal decomposition generates toxic and corrosive fluorinated by-products.
Section V - Health Hazard Data
Health Hazard
Threshold Limit Value
Overexposure Effects
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to AvoidHeating above 300°C
Section VI - Reactivity Data - Continued
Incompatible MaterialsStrong bases and alkali
Decomposition ProductsHF and possible oxides of carbon
Hazardous PolymerizationsDoes not occur
Polymerization to Avoid
Section VII - Spill or Leak Procedure
For SpillSweep up and avoid the generation of dust in the area
Waste Disposal MethodDispose of as solid waste
Section VIII - Special Protection
Respiratory ProtectionNIOSH-approved respirator for mists and fumes appropriate to the airborne concentration may be worn.
VentilationProvide local exhaust ventilation where heat can cause polymer breakdown.
Protective GlovesWear clean body covering and gloves impervious to dust and vapor to minimize skin contact.
Eye ProtectionSafety glasses with side shields are recommended for any type of handling.
Other Protective Equipment
Handling and StorageKeep dry and away from strong bases and alkali.
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained, or the safety and toxicity of the product. Polymer Plastics Company L.C. assumes no liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Data Available