The Plastics Today for the Technologies of Tomorrow

Polyolefin Heat-Shrinking Tubing Material Safety Data Sheet

POLYOLEFIN HEAT-SHRINKING TUBING

Effective DateSeptember 13, 1989
Revised DateSeptember 19, 2011
Trade NamePolyolefin Heat-Shrink Tubing
Chemical Family
Chemical FormulaPolyolefin
Section II - Hazardous Ingredients
Hazardous Components
Section III - Physical Data
Boiling Point (°F)N/A
Freezing Point (°F)
Volatility / Volume (%)
Melting Point90°C — does not melt because of cross-linked structure
Vapor Pressure (mmHg)N/A
Vapor Density (Air=1)N/A
Solubility in H₂O0.001
Appearance / OdorSlight characteristic odor of polymer
Specific Gravity (H₂O=1)1.35
Acidity
Section IV - Fire and Explosion Hazard Data
Flash Point350°C
Lower Flame Point
Higher Flame Point
Extinguishing MediaWater spray, dry powder or CO₂ foam
For FireUse water to keep fire-exposed containers cool. For large fires, use self-contained breathing apparatus and personal protective equipment.
Unusual Fire HazardNone
Section V - Health Hazard Data
Health HazardNone
Threshold Limit Value
Overexposure Effects
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to AvoidRecommended maximum operating temperature is 135°C. Do not heat above 300°C.
Section VI - Reactivity Data - Continued
Incompatible MaterialsOrganic solvents and lubricating oils
Decomposition ProductsNone
Hazardous PolymerizationWill not occur
Polymerization to Avoid
Section VII - Spill or Leak Procedure
For SpillSweep up and place in disposal container
Waste Disposal MethodIncinerate or bury in accordance with federal, state and local regulations.
Section VIII - Special Protection
Respiratory ProtectionNot necessary
VentilationNormal manufacturing environment
Protective GlovesNot necessary
Eye Protection
Other Protective Equipment
Handling and StorageStore in a cool and dry place
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained, or the safety and toxicity of the product. Polymer Plastics Company L.C. assumes no liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Data Available