The Plastics Today for the Technologies of Tomorrow

Peek Material Safety Data Sheet

PEEK

Effective DateAugust 12, 1992
Revised DateSeptember 20, 2011
Trade NamePEEK
Chemical Family
Chemical Formula
Section II - Hazardous Ingredients
Hazardous Components
Section III - Physical Data
Boiling Point (F)
Freezing Point (F)
Volatility / Volume (%)
Melting Point334°C (±10°C)
Vapor Pressure (mmHg)N/A
Vapor Density (Air=1)N/A
Solubility in H2OInsoluble
Appearance / OdorGrey-brown
Specific Gravity (H2O=1)
Acidity
Section IV - Fire and Explosion Hazard Data
Flash PointN/A
Lower Flame Point
Higher Flame Point
Extinguish MediaWater fog, foam, CO2, dry chemical
For FireSelf-contained breathing apparatus.
Unusual Fire HazardProduct will burn. Smoke emission is low; dust requires a high-temperature ignition source to ignite.
Section V - Health Hazard Data
Health Hazard
Threshold Limit Value
Over Exposure Effects
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to Avoid
Section VI - Reactivity Data - Continued
Incompatible MaterialsConcentrated sulfuric acid
Decomposition ProductsCarbon monoxide and carbon dioxide
Hazardous PolymerizationsWill not occur
Polymerization Avoid
Section VII - Spill or Leak Procedure
For Spill
Waste Disposal MethodDispose of solid waste in accordance with local, state and federal regulations.
Section VIII - Special Protection
Respiratory Protection
VentilationLocal exhaust
Protective GlovesImpervious gloves and apron when handling molten material.
Eye ProtectionFace shield and safety glasses with side shields.
Other Protective Equipment
Handling and Storage
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal request. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained or the safety and toxicity of the product, nor does Polymer Plastics Company L.C. assume any liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Date Available