The Plastics Today for the Technologies of Tomorrow

PCTFE Material Safety Data Sheet

PCTFE

Effective DateSeptember 5, 1995
Revised DateApril 14, 2011
Trade NameKelf
Chemical FamilyCTFE
Chemical FormulaPolychlorotrifluoroethylene
Section II - Hazardous Ingredients
Hazardous ComponentsNone
Section III - Physical Data
Boiling Point (F)N/A
Freezing Point (F)
Volatility / Volume (%)N/A
Melting Point210 - 212
Vapor Pressure (mmHg)N/A
Vapor Density (Air=1)
Solubility in H2OInsoluble
Appearance / OdorMilky-white and odorless
Specific Gravity (H2O=1)Approximately 1.0
Acidity
Section IV - Fire and Explosion Hazard Data
Flash PointDoes not flash
Lower Flame Point
Higher Flame Point
Extinguish MediaFoam, CO2, dry chemicals and water spray
For FireSelf-contained breathing apparatus and protective clothing
Unusual Fire HazardWhen heated above 150°C, decomposition products may form, including HF, HCl, etc.
Section V - Health Hazard Data
Health HazardHarmful if swallowed
Threshold Limit Value
Over Exposure Effects
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to AvoidHeat, sparks and open flames
Section VI - Reactivity Data - Continued
Incompatible MaterialsMolten alkali metals, interhalogen compounds and some kinds of amines
Decomposition ProductsToxic and corrosive gases, including HF, HCl, etc.
Hazardous PolymerizationsWill not occur
Polymerization Avoid
Section VII - Spill or Leak Procedure
For SpillCollect spilled material separately from other waste and place in separate containers
Waste Disposal MethodLandfill (preferred) or incineration
Section VIII - Special Protection
Respiratory ProtectionA mask for acidic gases is needed when this material is heated above 150°C.
VentilationUse local exhaust if this material is heated.
Protective Gloves
Eye ProtectionSafety glasses
Other Protective EquipmentEye wash station
Handling and StorageWash hands after handling. Do not smoke in work areas.
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal request. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained or the safety and toxicity of the product, nor does Polymer Plastics Company L.C. assume any liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Date Available