The Plastics Today for the Technologies of Tomorrow

Mylar® Polyester Material Safety Data Sheet

MYLAR® POLYESTER

Effective DateFebruary 2, 1993
Revised DateSeptember 13, 2011
Trade NameMylar
Chemical Family
Chemical FormulaPolyethylene Terephthalate
Section II - Hazardous Ingredients
Hazardous ComponentsNone
Section III - Physical Data
Boiling Point (F)
Freezing Point (F)
Volatility / Volume (%)N/A
Melting Point>235° C (>455° F)
Vapor Pressure (mmHg)
Vapor Density (Air=1)
Solubility in H2ONegligible
Appearance / OdorClear transparent film, no odor, clear in color
Specific Gravity (H2O=1)N/A
Acidity
Section IV - Fire and Explosion Hazard Data
Flash Point
Lower Flame Point
Higher Flame Point
Extinguish Media
For Fire
Unusual Fire Hazard
Section V - Health Hazard Data
Health Hazard
Threshold Limit Value
Over Exposure Effects
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to AvoidStrong acids and bases may hydrolyze the film
Section VI - Reactivity Data - Continued
Incompatible MaterialsNone reasonably foreseeable
Decomposition ProductsHazardous gases / vapors produced are carbon monoxide and hydrocarbon oxidation products including organic acids, aldehydes and alcohols.
Hazardous PolymerizationsWill not occur
Polymerization Avoid
Section VII - Spill or Leak Procedure
For Spill
Waste Disposal MethodRecycling, incineration with energy recovery and landfill
Section VIII - Special Protection
Respiratory ProtectionNot required
Ventilation
Protective GlovesWear gloves when handling hot film
Eye ProtectionSafety glasses
Other Protective Equipment
Handling and StorageAvoid breathing vapors / fumes produced during processing. Store in a cool / dry place.
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal request. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained or the safety and toxicity of the product, nor does Polymer Plastics Company L.C. assume any liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Date Available