The Plastics Today for the Technologies of Tomorrow

G5 G9 Material Safety Data Sheet

G-5 G-9

Effective DateDecember 14, 2010
Revised DateSeptember 13, 2011
Trade NameG5 / G9 Melamine
Chemical Family
Chemical FormulaFiberglass, Melamine/formaldehyde Resin
Section II - Hazardous Ingredients
Hazardous Components
Section III - Physical Data
Boiling Point (F)
Freezing Point (F)N/A
Volatility / Volume (%)<0.05%
Melting PointN/A
Vapor Pressure (mmHg)N/A
Vapor Density (Air=1)N/A
Solubility in H2OInsoluble
Appearance / OdorGrayish Brown Solid
Specific Gravity (H2O=1)1.7
Acidity
Section IV - Fire and Explosion Hazard Data
Flash Point<00°F
Lower Flame Point
Higher Flame Point
Extinguish MediaCarbon dioxide, water or foam
For FireIsolate fire area and deny unnecessary entry. Firefighters should wear positive-pressure self-contained breathing apparatus and protective clothing.
Unusual Fire HazardDust from machining / fabrication operations may be explosive in the presence of an ignition source.
Section V - Health Hazard Data
Health Hazard
Threshold Limit Value
Over Exposure EffectsProlonged inhalation of dust can produce lung disease.
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to AvoidProtect from heat, sparks, flame and possible sources of ignition.
Section VI - Reactivity Data - Continued
Incompatible MaterialsAvoid contact with strong acids and bases.
Decomposition ProductsCarbon dioxide, carbon monoxide, bromine and other hazardous gases.
Hazardous PolymerizationsWill not occur
Polymerization Avoid
Section VII - Spill or Leak Procedure
For SpillSweep up spilled material using water spray to suppress the dust.
Waste Disposal MethodDispose of in accordance with all federal, state and local regulations.
Section VIII - Special Protection
Respiratory ProtectionWear a properly fitted particulate respirator for protection against dust.
VentilationUse local exhaust for sawing and machining operations.
Protective GlovesWear gloves to protect against sharp edges and thermal effects when handling heated material.
Eye ProtectionWear safety glasses.
Other Protective EquipmentWear impervious clothing / boots for prolonged or repeated skin contact.
Handling and StorageStore in a clean, cool, ventilated area away from all sources of ignition.
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal request. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained or the safety and toxicity of the product, nor does Polymer Plastics Company L.C. assume any liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Date Available