The Plastics Today for the Technologies of Tomorrow

Borated 5% Polyethylene Material Safety Data Sheet

Borated 5% Polyethylene

Effective DateJanuary 17, 1989
Revised DateSeptember 15, 2011
Trade NameBorated Polyethylene 5%
Chemical Family
Chemical Formula
Section II - Hazardous Ingredients
Hazardous ComponentsN/A
Section III - Physical Data
Boiling Point (F)N/A
Freezing Point (F)
Volatility / Volume (%)
Melting PointCrystalline, 219 - 239° F (100 - 115° C)
Vapor Pressure (mmHg)N/A
Vapor Density (Air=1)N/A
Solubility in H2OInsoluble
Appearance / OdorNatural color plastic sheet - little or no odor
Specific Gravity (H2O=1)0.951
Acidity
Section IV - Fire and Explosion Hazard Data
Flash PointN/A
Lower Flame Point
Higher Flame Point
Extinguish MediaDry chemical, water spray, carbon dioxide, foam
For FireDo not enter fire area without proper protection; fight fire from a safe distance.
Unusual Fire HazardNone
Section V - Health Hazard Data
Health Hazard
Threshold Limit Value
Over Exposure Effects
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to AvoidBurning flame, temperatures over 250° F
Section VI - Reactivity Data - Continued
Incompatible Materials
Decomposition Products
Hazardous PolymerizationsWill not occur
Polymerization Avoid
Section VII - Spill or Leak Procedure
For SpillUse normal procedures for clean up
Waste Disposal MethodDispose of in accordance with local regulations
Special VIII - Special Protection
Respiratory Protection
Ventilation
Protective Gloves
Eye Protection
Other Protective Equipment
Handling and Storage
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal request. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained or the safety and toxicity of the product, nor does Polymer Plastics Company L.C. assume any liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Data Available