The Plastics Today for the Technologies of Tomorrow

ABS Material Safety Data Sheet

ABS

Effective DateMay 7, 1996
Revised DateSeptember 13, 2011
Trade NameABS
Chemical FamilyCycolac Resin
Chemical FormulaAcrylonitrile-butadiene-styrene terpolymer
Section II - Hazardous Ingredients
Hazardous ComponentsStyrene
Section III - Physical Data
Boiling Point (F)N/A
Freezing Point (F)
Volatility / Volume (%)
Melting PointSoftens gradually over a wide temperature range
Vapor Pressure (mmHg)Negligible
Vapor Density (Air=1)N/A
Solubility in H2OInsoluble
Appearance / OdorSolid with slight odor
Specific Gravity (H2O=1)>1
Acidity
Section IV - Fire and Explosion Hazard Data
Flash PointN/A
Lower Flame PointN/A
Higher Flame PointN/A
Extinguish MediaWater Spray
For FireApproved pressure demand breathing apparatus and protective clothing should be used.
Unusual Fire Hazard
Section V - Health Hazard Data
Health Hazard
Threshold Limit Value
Over Exposure Effects
Section VI - Reactivity Data
Chemical StabilityStable
Conditions to AvoidDo not exceed melt temperature
Section VI - Reactivity Data - Continued
Incompatible Materials
Decomposition ProductsProcessing fumes evolved may include trace levels of styrene, acrylonitrile, acrolein, acetaldehyde, acetophenone, ethylbenzene, cumene, 4-vinylcyclohexene and phenols.
Hazardous Polymerizations
Polymerization Avoid
Section VII - Spill or Leak Procedure
For SpillSweep or gather up material and place in proper container for disposal.
Waste Disposal MethodRecycling, landfill or incinerate in accordance with federal, state and local requirements.
Special VIII - Special Protection
Respiratory Protection
Ventilation
Protective Gloves
Eye Protection
Other Protective Equipment
Handling and StorageStore in a dry place away from moisture, excessive heat and sources of ignition.
Section IX - Special Precautions
Hazard Class
DOT Shipping Name
Reportable Quantity (RQ)
UN NumberNA#
Packaging Size
Notes:
All information, recommendations and suggestions appearing herein concerning this product are based upon data obtained from the manufacturer and/or recognized technical sources. It is the user’s responsibility to determine the safety, toxicity and suitability of their own use, handling and disposal request. Since actual use by others is beyond our control, no warranty, express or implied, is made by Polymer Plastics Company L.C. as to effects of such use, the results to be obtained or the safety and toxicity of the product, nor does Polymer Plastics Company L.C. assume any liability arising out of use by others of the product referred to herein. The data in this MSDS relate only to the specific material designated herein and do not relate to use in combination with any other material or in any other process.
REFERENCES: N/A = Not Applicable, N/D = Not Determined, N.D.A. = No Data Available